Recents in Beach

Mycell Comet T1 Flash File Without Password LCD Fix Flash Dead Recovery

 Mycell Comet T1 Flash File Android 7.1 MT6580

Thank you for visiting our site. See the title, you will understand that today we will share how to download and install Flash Files TAC MYCELL TAB Comet T1. Friend, it looks like you are using a Mycell Comet T1 tablet. Even if your tablet faces any software problem and you want to install flash or firmware on your tablet. But you don't need to worry. Today we will help you install flash or firmware on mycell Comet T1 tablet. For this, you need to follow the complete guide carefully.

Let me say one thing first: Your tablet will be updated as soon as you install the Firmware MyCell Tab Comet T1. And install firmware MyCell Tab Comet T1 will delete all data, including the contents of your cellphone's internal storage. So, you have to back up all your data before installing the firmware. Friends, we have shared this guide into a few steps. You read it and follow the complete guide.
Mycell Comet T1 Flash File
Mycell Comet T1 Flash File Without Password

Paid 50 Tk
01825458842, 01780532282

MyCell Tab Comet T1 Flash File Fixed for software problems only.

 MyCell Tab Comet T1 firmware flashing If your IC or CPU tablet is damaged, we are not responsible for the errors that occur after our files and blink. If your tablet has hardware problems, your problem will not be resolved. Check your mobile EMMC to see if it's okay. Then flash.
Requirements for Flash MyCell Tab Comet T1 Stock ROM.

    Windows PC or Laptop.

    MyCell Tab file firmware comet T1.
    Driver MediaTek USB VCOM.
    SP Flash Tool.
    Detected USB data cable.
    Good battery backup (at least 60%).

Steps to install firmware on the Mycell Comet T1 tab.

Friends recently learned a lot about Firmware MyCell Tab Comet T1. Now the steps are very important. In this step we will show you how to install the firmware on your MyCell Comet T1 tablet. So read and follow the steps very carefully.

MyCell Comet T1 Tablet is powered by a MediaTek chipset, so you need to download the USB Driver MediaTek from the download section above and install it on your PC or laptop. Then again you need to download the SP flash tool software above the download section. Because the MediaTek chipset cellphone can easily install firmware with the SP Flash Tool. The complete installation process is given below, you must follow the process that has been completed.

    Download the SPFlash tool to your PC.

    Download MyCell Tab Comet T1 Flash firmware file.
    Extract the software to the folder you want.
    Look for flash_tool and launch. Minimize the spflash tool window.
    Find firmware Flash file Mycell T1 Flash download downloaded.
    Extract files from RAR format.
    Open the SPFlash tool.
    Click on Scatter-loading.
    Find the Hamber file in the Flash File folder folder MyCell T1 extracted.
    Select the Hamber file in the directory.
    Wait to load the file.
    Turn off your MyCell Comet T1 tablet.
    Click Download.
    Connect your MyCell Comet T1 tablet when you start flashing.
    Flash is finished
Step 1: Download Firmware MyCell Comet T1 Including Flash Tool & USB Driver.
Step 2: Extract ROM, USB drivers and tools on your computer.
Step 3: After extracting you will see the flash tool, driver, and instruction manual
Step 4: Install the USB driver if it's installed then skip.
Step 5: Open the flash tool
Step 6: Load the firmware in the format (Scatter, PAC. CPB) from the firmware folder.
Step 7: Click the Start button Download / Flash / Write firmware like your tool option
Step 8: Connect your cellphone to a computer using a good USB cable.
Step 9: After all the green arena or the OK message will appear.
Step 10: Then it managed to flash finish & and all finished. 


Post a Comment